Why Is Rogers Internet So Slow?

Fix Rogers Internet So Slow Problem:

Rogers internet may get slow because of various reasons. If you wish to speed it up, then you can try different troubleshooting solutions. Everyone wants an internet that is both reliable as well as fast.

Here, you will read different solutions that can help you achieve that. But before you move on to different troubleshooting solutions, you need to first know why is your Rogers internet so slow.

What Causes Rogers Internet Slow Speed Issues? 

• Multiple device connected
• Service outage
• Wrong network settings

How can I Fix Rogers Internet so Slow Problem? 

You need to understand that different causes lead to slow internet connection problems. The solutions are easy to carry out if you carry out the prescribed steps to resolve your Rogers internet so slow problem. 

Method 1: Try Connecting to both 5.0 GHz and 2.4GHZ WiFi

If you are using a wireless network and you are still experiencing slow internet speed issues, then you need to ensure that you are connected to the best wireless network. Two popular brands for the best network coverage are the 5.0 GHz band and the 2.4 GHz band.

The 2.4 GHz band provides strong signals even when you are far away from your router device. On the other hand, 5.0 GHz provides the fastest internet connection over short distances. However, it fails to penetrate through obstacles such as walls.

To auto-switch between the bands and to fix Rogers internet so slow problem, below are the steps that you need to follow. 

Step 1: First of all, you need to go to the Wi-Fi list of your device. 

Step 2: After that, you need to search for the network name of your Roger and s internet router.

Step 3: You can see 5G at the end of the name of your 5.0 GHz band. 

Step 4: Connect to both bands. 

Step 5: Your device will auto-switch the band as per the need. 

Method 2: Ensure that Modem Connections are Secure

Loose connections between the router and modem can also lead to Rogers internet so slow issue. The cables tend to get loose if you move the furniture near it. They may also get pulled out at the time of cleaning and can terribly impact your internet speed.

Below are the steps that you need to perform in order to ensure that the connections are secure. 

Step 1: Check the networking wires on your modem. 

Step 2: After that, pull the connector and then put it back and don't leave until you hear a click.

Step 3: Then, you need to check the cords on your modem. 

Step 4: After that, ensure that they are pushed in. 

Nevertheless, there is a chance that they may get loose or break and can affect your internet speed. 

Method 3: Move your Router to an Open Area

A lot of people are unaware of the fact that router devices are quite sensitive. The brick walls and concrete can impact the signals coming from the router. If there are a lot of obstructions between your device and router, then this may impact the connection.

The sources of interference can also impact the signal quality and internet speed. In case you have been using your router for a very long time, then that means it isn't an optimal area with changes near your home.

In such a case, you must try to change the location of your router to a location that is free from interference and obstructions.

Below are some sources of interference that you need to avoid that can further help you resolve Rogers internet so slow issue.

• Baby monitors and cordless phones
• Garage door openers
• Concrete walls
• Microwave ovens 
• Bluetooth devices

Method 4: Change the Settings of Your Router to IPV4

There is a chance that the settings of your router are leading to slow internet problems. Therefore, you must check the settings of your router. IP addresses have two classes. One is version 4 and the other one is version 6. If you are currently using the IPv6 version, then you must switch to the IPv4 version.

Below are the steps that you need to follow to change the settings to IPv4 and to fix the Rogers internet so slow problem. 

Step 1: First of all, log into the dashboard of your router using your web browser. 

Step 2: Search for the network settings and then select them. 

Step 3: Go to Gateway settings. 

Step 4: Now, select piv4 only rather than dual. 

Method 5: Use a Wired Connection

If you wish to improve internet stability, then you must not rely on a wireless connection rather you should focus on a wired connection. You can do this if you have a laptop or computer connected to a wired network. Nevertheless, you may have to stick to wireless for tablets and phones. 

Step 1: Your LAN cables should be long enough for connecting your router to the PC. 

Step 2: Now, use the cables to connect your PC to the router. 

Step 3: Please ensure that your connections are secure.